WAN

• LP6: LTE Advanced LTE/HSPA+ (SIM-based Auto-Carrier Selection for all North American carriers)
• LPE: 4G LTE/HSPA+/EVDO (multi-carrier, North America)
• LP3: 4G LTE/HSPA+ (Europe, EMEA, and Australia/New Zealand)
• Three LAN/WAN switchable 10/100 Ethernet ports – one default WAN (cable/DSL/T1/satellite/Metro Ethernet)
• WiFi as WAN, Metro WiFi; 2x2 MIMO "N" 2.4 GHz or 5 GHz; 802.11 a/b/g/n/ac (IBR1100 only)

LAN

• Dual-band, dual-concurrent WiFi; 802.11 a/b/g/n/ac (IBR1100 only)
• Three LAN/WAN switchable 10/100 Ethernet ports – two default LAN
• Serial console support for out-of-band management of a connected device

PORTS

• Power
• 2-wire GPIO
• USB 2.0
• 3 Ethernet LAN/WAN
• 2 cellular antenna connectors (SMA)
• 1 active GPS antenna connector (SMA)
• 2 WiFi antenna connectors (R-SMA)
• Serial DE-9 (commonly called "DB-9") connector – RS-232 (Out-of-Band Management of an external device requires a null modem adapter/cable)

TEMPERATURE

• LP6 models: −30 °C to 60 °C (−22 °F to +140 °F) operating
• LPE models: −30 °C to 70 °C (−22 °F to +158 °F) operating
• All models: −40 °C to 85 °C (−40 °F to +185 °F) storage
• Includes temperature sensor with options for alerts and automatic shutoff

HUMIDITY (non-condensing)

• 5% to 95% operating
• 5% to 95% storage

POWER

• DC input steady state voltage range: 9–36 VDC (requires inline fuse for vehicle installations)
  • For 9–24 VDC installations, use a 3 A fuse
  • For > 24 VDC installations, use a 2.5 A fuse
• Reverse polarity and transient voltage protection per ISO 7637-2
• Ignition sensing (automatic ON and time-delay OFF)
• Power consumption:
  • idle: typical=400mA@12VDC (4.8W); worst case=800mA@12VDC (9.6W)
  • Tx/Rx: typical=650mA@12VDC (7.8W); worst case=1300mA@12VDC (15.6W)
  • 12VDC 2A adapter recommended

SIZE

• 5.3 in x 4.4 in x 1.4 in (134 mm x 112 mm x 35 mm)

WEIGHT

• 16.1 oz (457 g)

CERTIFICATIONS

• FCC, CE, IC
• WiFi Alliance (IBR1100 only) – 802.11a/b/g/n certified, 802.11ac supported
• Safety: UL/CUL, CB Scheme, EN60950-1
• Hazardous Locations: Class I, Div. 2
• Shock/Vibration/Humidity: compliant with MIL STD 810G and SAEJ1455
• Ingress Protection: compliant with IP64 (includes protection from dust and splashing water)
• Materials: WEEE, RoHS, RoHS-2, California Prop 65
• Vehicle: E-Mark, compliant with ISO 7637-2
• Telecom: PTCRB/CTIA, GCF-CC

GPS

• GPS Protocols: TAIP and NMEA 0183 V3.0
• Satellite channels: Maximum 30 channels (16 GPS, 14 GLONASS), simultaneous tracking
• Concurrent standalone GPS, GLONASS, BeiDou and Galileo (LP6 models only)
• 1 Hz refresh rate
• Accuracy:
  • < 2m: 50%
  • < 5m: 90%
  • Horizontal: < 2m (50%); < 5m (90%)
  • Altitude: < 4m (50%); < 8m (90%)
  • Velocity: < 0.2 m/s
• Acquisition:
• Hot start: 1 second
• Warm start: 29 seconds
• Cold start: 32 seconds
• Sensitivity
  • Tracking: −160 dBm (tracking sensitivity is the lowest GNSS signal level for which the device can still detect an in-view satellite 50% of the time when in sequential tracking mode)
  • Acquisition (standalone): −145 dBm (acquisition sensitivity is the lowest GNSS signal level for which the device can still detect an in-view satellite 50% of the time)
• Operational limits: altitude < 6000 m or velocity < 100 m/s (either limit may be exceeded, but not both)